Service Center

Barnett Clutches Service Center & Helpdesk


Before Installation
Before installing the clutch, check the following:

A.       Check the inner shell for bearing grooves (replace if necessary).

B.       Grooves on clutch surface of shell (replace shell).

C.      Rivets broken or have come loose (repair or replace).

D.      Notched steel plate stops (replace shell).

E.       Check the bottom of the case for parts, pieces, chunks, shavings, etc. You might have other problems!

NOTE: If the primary chain or belt it not properly adjusted to service manual specs, it can cause dragging problems to the clutch shell.